Polyester covering that is quick and easy to apply, and provides considerable rigidity to a finished structure.

2m roll, 600mm wide

Apply by cutting a piece 25 to 50mmm oversize for the panel being covered. Lay the covering over the panel to be covered. Tack the covering to the frame using a covering iron set at only sufficient temperature to activate the heat activated adhesive on the back of the film. Once the film has been tacked around the frame, increase the temperature of the covering iron so that it is just sufficient to shrink the film and remove the wrinkles.

Compound curves can be covered by pulling the covering around the curve, and using the heated covering iron to work the covering down and around the curve.

Should there be a warp in a covered wing, gentle twist the wing panel in the desired direction, apply a warm iron over the entire area (until the wrinkles go smooth), and the wing will stay in it's new position until the twist is adjusted again using the same method.

SKU PFCADYELL33
Brand Profilm
Shipping Weight 0.3000kg
Shipping Width 0.060m
Shipping Height 0.060m
Shipping Length 0.640m
Shipping Cubic 0.002304000m3

Be The First To Review This Product!

Help other RCMA Model & Hobby Shop users shop smarter by writing reviews for products you have purchased.

Write a product review

Related products

More From This Category