Lite Filler light as air, spreads easily, dries fast, and sands to a smooth finish. Perfect for painting or covering. It fills cracks and pinholes in wood, foam, fiberglass and painted surface without shrinking with easy application.
Ready to use.
Fast dry and easy sanding, won't clog sandpaper.
Lightweight and no shrinkage.

Instructions

1. Brush to clean the area to be filled.
2. Stir Lite Filler thoroughly. If necessary, spray water for thinning.
3. Too much water may result in shrinkage when the filler dries.
4. Apply Lite Filler to the desired area using a spatula or spoon. Reaseal jar tightly.
5. Clean your tools and work surface with soap and water.
6. Allowing filler to dry completely, then smooth surface with sandpaper.
7. Drying time depends on the thickness of material applied; 1.5mm thickness will dry in about 15 minutes.
8. Lite Filler may be applied to balsa, plywood, styrofoam and fiberglass.
9. Any paint or covering film may be applied to Lite Filler.