SOLVENT-BASED ACRYLIC PAINT
Mr. COLOR has long been regarded highly by modellers worldwide as a model paint that delivers an outstanding finish. A wide range of colours are available, and these are suitable for military tanks, aircraft, car models, robot models, and many more.

Mr. COLOR is available in a wider range of colours and finishes than AQUEOUS HOBBY COLOR. Compared to AQUEOUS HOBBY COLOR, it has a faster drying speed and its paint film is stronger.

  • SUITABLE FOR BOTH HAND PAINTING AND AIRBRUSHING

THINNING RATIO for Mr. COLOR
BRUSH PAINTING:

1 : 0.8~1.0
(Mr. COLOR : Mr. COLOR THINNER)

AIRBRUSHING:
1 : 1~2
(Mr. COLOR : Mr. COLOR THINNER)
Mr. LEVELING THINNER IS RECOMMENDED FOR AIRBRUSHING

  • Must only be thinned with Mr. COLOR THINNER, Mr. COLOR LEVELING THINNER or MR.COLOR RAPID THINNER.
  • Do not thin with THINNER FOR AQUEOUS HOBBY COLOR and ACRYSION SOLVENT.

CHOOSE AN APPROPRIATE THINNER
Mr. COLOR THINNER:
The most basic thinner for Mr. COLOR
Mr. LEVELING THINNER: Slows down the drying speed. Recommended for gloss paints. Use this thinner to thin Mr. COLOR if airbrushing.
Mr. RAPID THINNER: Speeds up the drying speed. Recommended for matt paints and metallic paints.

MIXING
CAN BE MIXED WITH:

✓ Mr. COLOR
✓ Mr. COLOR GX, Mr. METALLIC COLOR GX, Mr. CLEAR COLOR GX
✓ Mr. COLOR 40TH ANNIVERSARY, Mr. CRYSTAL COLOR,  Mr. SUPER METALLIC
✓ LASCIVUS

CANNOT BE MIXED WITH:
× AQUEOUS HOBBY COLOR
× ACRYSION, ACRYSION BASE COLORS
× CLASSY 'N DRESSY COLORS
× Mr. METAL COLOR

  • AQUEOUS HOBBY COLOR and ACRYSION can be applied over a coat of Mr. COLOR.
  • Mr. COLOR cannot be applied over a coat of AQUEOUS HOBBY COLOR and ACRYSION.

HOW TO APPLY Mr. COLOR
Apply 1 to 2 coats if painting with a paint brush, or 2 to 3 coats if airbrushing. 
After applying a coat of Mr. COLOR, let it dry for a few hours. After the first coat is completely dry, apply a second coat.

TIP!

  • Use T114 Mr. Paint Remover to remove paint from a surface.
  • Clean the tools with Mr. COLOR THINNER or Mr. TOOL CLEANER.
  • Mix approximately 5 to 10% of C30 Flat Base to convert gloss colors to a semi gloss finish, or 10 to 20% for a matt finish.
  • Mr. HOBBY TOPCOAT and SUPER CLEAR can be applied over a coat of Mr. COLOR.
  • Do a test paint before you apply paint on your model kit.

ATTENTION:

  • Put the lid back on after use.
  • Store in a cool and ventilated place, away from direct sunlight.
  • Use in a well ventilated area. 
  • Made in Japan.
SKU GNC002
Barcode # 4973028716016
Brand Mr Hobby
Shipping Weight 0.1000kg
Shipping Width 0.060m
Shipping Height 0.060m
Shipping Length 0.100m

Be The First To Review This Product!

Help other RCMA Model & Hobby Shop users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category