GT Power CCPM Servo Consistency Master is a very handy servo driver/tester that can test the consistency and set the centring for up to 3 servos simultaneously. This is great for anyone who is setting up RC airplane, car, or CCPM 3D helicopter and would like to see if their servos are actually working or compare the response time of each servo before installing them in your model. Additionally, you can set your servo into neutral/centre mode without having a Transmitter/Receiver.

There are 3 available test modes: Manual Mode, Neutral Mode, Automatic "window wiper" Mode

• Manual mode -Turn the knob with different speed. Check the reaction time.
• Neutral mode - Make the servo go back to the neutral point.
• Automatic “window wiper” mode-make the servo swing like window wipers in the biggest angle.

Features

• It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on
• You can also connect 1-3 ESC to test and compare their reaction time respectively
• Connect 3 servos of the CCPM helicopters, adjust the helicopters and select servos
• It can also connect the servo of airplanes. Install the steering-box and adjust planes by using such as the neutral mode and so on

Specs
Input: 4.8 ~ 6V
Output: up to 3 servos at once!
Dimensons: 48 x 42 x 17mm