A-STAND Metallic Lacquer Chrome for Lexan
By using the extensive range of A-Stand metallic colours, you can get any metallic finish on your models including copper, brass, gold, chrome and different shades of burnt metal. These metal colours are extremely tough, and they won’t be affected by any product or paint, and their very fine pigment creates a completely smooth finish.

Why to use A-Stand?
The excellent fluidity of A-Stand products makes them easy to spray without clogging the airbrush. They also provide a tough and durable finish once dry, allowing the application of any other lacquer, enamel weathering products, or acrylic paint on top without issue. In addition, modelling masking tape can be applied over the hard finish of the A-Stand paints with no problem.

A-Stand products dry to the touch in a short period of time of approximately 30 minutes, depending on the amount of paint applied, ambient humidity and temperature. Allow 1 hour of drying time before the applying other products safely, they will completely cure in 24 hours. The thinner used in these paints and varnishes, like in other lacquer products, are only suitable for airbrush use, not for brush painting.

Click on this video and learn more about metallic Lacquers.

Remember that all lacquer paints contain toxic components, and it is advisable to use a mask for its application, and to spray these products in a well-ventilated area.

The A-Stand paint series includes various lines of products used to apply a range of effects and finishes on your models.
Always clean and dilute with A-Stand Airbrush Thinner & Cleaner, A.MIG-2013.