For T-REX 700E.

  • 700E Linkage x 4(2x110mm)
  • 700E Aileron Control rod Carbon Fiber Shaft x 8(4x5.4x6.5mm)
  • 700E Aileron Control rod Carbon Fiber Tube x 4(2.2x3.9x96mm)
  • 700N Ball Link x 8(5x20.5mm)

 

Mix thoroughly suitable amount of epoxy.   Apply generous amount of epoxy on the tips of carbon tube after sliding over the linkage rod.
(Note: for quick drying epoxy, work fast as it must be applied prior to curing)
 
Slide the carbon end caps on both sides of the carbon tube   Thread the ball links onto the linkage rod until the base to base length is 97.5mm.
 
If gap exists between the ball link and end caps after correct length has been achieved, slide the end caps outwards to cover the gaps (note: must be done before epoxy cures)   Wipe away excess epoxy and set it aside to cure.
 
Pop the finished link back between aileron servo horn and bell crank    
   

 

SKU H70068
Barcode # 4713413956036
Brand Align
Shipping Weight 0.6000kg
Shipping Width 0.080m
Shipping Height 0.080m
Shipping Length 0.080m
Shipping Cubic 0.000512000m3

Be The First To Review This Product!

Help other RCMA Model & Hobby Shop users shop smarter by writing reviews for products you have purchased.

Write a product review

Related products

More From This Category